I reached out to Mad Ramps about the MAD-MOUNT Wall Mount Brackets for Mad-Ramps Pivoting ATV/UTV Ramps part # MR27DR and they informed me that the brackets are both 36" long x 2-1/2" tall. I have attached a photo below with this as well. view full answer...
The 1,500 pound working load limit (WLL) for the Erickson ATV E-Track Tie-Down Kit # EM09160 referenced in your question does refer to the combined capacity of both straps and chocks. Since your UTV weighs close to 2,000 pounds I recommend using two sets to secure all four of its wheels to the trailer. view full answer...
The CIPA ATV Handlebar Mirror, # CM11132, fits into the end of the handlebars on either side. In order for it to fit, the ends of the handlebars will have to have an opening. If the inside diameter of the opening is between 0.63 (5/8) and 0.73 (3/4) inches, the mirror will fit. There is a tension screw that manipulates an anchor on the inside to hold it in place.
You will need to measure each ATV to determine fit. The mirror was designed as a universal type of item to fit most all terrain... view full answer...
That is a great question!
I reached out to my contact at M-3 who makes the Locking Floor Mounted Storage Box for Enclosed Trailers - 19" x 29" x 7-1/4" # M387FR you were wanting to add to your cargo trailer, and the box is indeed rated for an ATV or UTV rolling over it when loading and unloading.
I included a video of the # M387FR for you to take a look at. view full answer...
We do offer many hitch cargo carriers with ramps, but none 48" wide. The widest cargo carrier with a ramp we offer is the 32x48 Reese Steel Solo Cargo Carrier and Folding Ramp for 2" Hitches - 400 lbs, part # PS10401-10402. This carrier is 32" wide and the length with the ramp included is 96". It has a 2" hitch and a weight capacity of 400 lbs. It is fairly heavy at 101 lbs.
If you have a pickup truck you can go with something like the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps... view full answer...
The Stromberg Carlson 4000 Series Tailgate, part # VG-97-4000, features a glass-filled, black composite plastic frame that is blow molded to create a lightweight yet strong-as-steel tailgate.
I spoke with my contact at Stromberg Carlson and they said that do not give the tailgate a weight rating because it is not designed to hold any large quantity of weight. They said in the open position, the tailgate will hold a small toolbox, but it is not designed to hold two or three adults at the... view full answer...
I spoke with my contact at Snowsport about the Hold Down Strap, # A60220. He stated that the strap does not have a specific weight capacity but it is strong enough for its intended purpose
This strap is designed for use with Snowsport ATV, UTV, ZTR, HD and 180 snowplows, so it is long enough for those applications. I did measure the strap and it is 88 inches long.
The strap has loops at each end. These loops are designed to be attached to specific points on the snowplow, so you would... view full answer...
You are right; Timbren Axle-less suspension systems are perfect for your application!
The 2,000 pound capacity of Timbren Axle-Less Trailer Suspension System with Hubs - 5 on 4-1/2 - Regular Tires - 2,000 lbs Item # A20RS545 is for the whole system so each half is rated for 1,000 pounds.
If you need more capacity we have # A35RS545 rated for a total of 3,500 pounds. And up from there is # ASR5200S01 which is rated for 5,200 pounds total but it doesn't come with hubs. For compatible hubs... view full answer...
Go To Results